Ⅰ. Equipment Introduction
This equipment is applicable to thickness measurement for soft packaging power battery cells, but also can detect other kinds of non-battery flexible sheet products. Servo motor and sensor are adopted for lifting to ensure that the test pressure is 500g.
Ⅱ. Operation Steps
1.Manually put the battery on the test platform of the
thickness measuring machine;
2.Press the START button and press the test plate
down for test;
3.Lift the test plate after the completion of test;
4.Remove the battery by manual, the whole steps
are finished, then the next test will be entered.
Ⅲ. Main Components of the Equipment
1. Sensor: optical transmission
2. Programmable controller: independently developed by Chengli
3. Instrument: spraying and baking on the surface
4. Components material: aluminum, steel and Level 00 Jinan green marble.
5. Safety cover: sheet metal
Ⅳ. Technical Parameters of the Equipment
S/N | Item | Configuration |
1 | Effective test area | L120mm×W150mm |
2 | Thickness test scope | 0-30mm |
3 | Working distance | 80mm |
4 | Comprehensive measurement error | ≤0.01mm |
5 | Flatness of marble | ≤0.003mm |
6 | Test pressure | 500g |
7 | Pressure mode | With counterweight, the pressure error is ±5% |
8 | Pressurization time | 2±0.5S |
9 | GR&R | <10% |
10 | Working cycle of the system | ≤8S |
11 | Linear scale resolution | 0.001mm |
12 | Voltage | AC220V,50Hz |
13 | Transmission mode | Guide rail + screw rod + servo motor |
14 | Weight | 40kg |
15 | Operating system | PPG special software |
Ⅴ. Basic equipment requirements and main component requirements:
5.1. Equipment color: white and black;
5.2. Working temperature: 23±2℃, humidity: 40-70%, vibration: <15Hz;
Ⅵ. Installation, Commissioning and Training Requirements
6.1. The relevant power supply shall be prepared by the Buyer to the installation site;